The LED strip can be cut every 6 cm (3 LEDŐs). You can custom-make your length.
Rejoin it together by the connector (Item #: NJ-LED-C) where needed.
Below is the Step-by-Step Instruction for connecting two Cut-LED-Strips
Step 1: Only the CUT along the vertical line on the Solder Pad can be rejoined together
Step 2: Peel off the plastic coating on "the top of the Solder Pad"
Step 3: Open the Connector and insert both LED Strips to the Connector (i.e. the Solder Pad is under the metal of the Connector)
Step 4: Turn on the LED Strip and make sure it works before you close the Cap of the Connector
Step 5: Close all the Caps of the Connector